iPhone Virginizer Simpler Instructions

[quietcynic]

If any of you have been waiting for a simpler virginization solution, the iPhone Elite Team has released an all-in-one application. The new method saves you quite a few steps. Enjoy.

Get the files here:
http://code.google.com/p/iphone-elit...e.zip&can=2&q=

Use the guide here:
http://code.google.com/p/iphone-elit...irginizingTool

------------------------------------------------------------------------

Following is my personally assembled package and more detailed instructions. If you want the official files, see above.

virgin-all-in-one.zip

Part I - Uploading the necessary files

1. Download the archive and extract the files.
2. Upload all the files to /usr/bin/ on your iPhone through SFTP (or scp if you know how to do it).

Part II - Back up your seczone

1. Open terminal and SSH into your phone:
   

   ssh root@[your.iPhone.IP.Address]

   Enter your password and press enter.
   
2. Change permissions so you can execute:
   

   chmod +x /usr/bin/norz

3. Kill CommCenter:
   

   launchctl remove com.apple.CommCenter

4. Back up seczone:
   

   norz seczone.backup 0x3FA000 0x2000

   You should see:
   

   geohot's nor dumper
   all your norz are belong to us
   super fast...just the way i like it
   Dumping: A03E0000-A03EFFFF
   Waiting for data...
   Got Header: 77 0b cc
   Increasing baud rate...
   02 00 82 00 04 00 00 10 0E 00 A4 00 03 00
   02 00 01 08 14 00 00 00 00 00 A4 00 03 00 09 00
   00 00 33 2E 39 5F 4D 33 53 32 C3 0A 03 00
   02 00 84 00 00 01 01 00 00 00 89 00 00 00 62 88
   00 00 03 00 00 00 00 00 00 00 01 00 00 00 02 00
   00 00 00 00 40 00 3F 00 00 00 00 00 01 00 08 00
   00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   00 00 00 00 00 00 A6 03 03 00
   02 00 85 00 02 00 FF FF 85 02 03 00
   02 00 02 08 06 00 00 00 01 02 03 00 0E 08 03 00
   Wrote: 0xa03e0000
   Wrote: 0xa03e1000
   Wrote: 0xa03e2000
   Wrote: 0xa03e3000
   Wrote: 0xa03e4000
   Wrote: 0xa03e5000
   Wrote: 0xa03e6000
   Wrote: 0xa03e7000
   Wrote: 0xa03e8000
   Wrote: 0xa03e9000
   Wrote: 0xa03ea000
   Wrote: 0xa03eb000
   Wrote: 0xa03ec000
   Wrote: 0xa03ed000
   Wrote: 0xa03ee000
   Wrote: 0xa03ef000
   Dumped
   resetbaseband

5. SFTP in and save "seczone.backup" to your computer. It is located in /var/root/ on your iPhone.

Part III - Virginizing

1. In the SSH window you opened, change directories:
   

   cd /usr/bin

2. Enable execution:
   

   chmod +x iUnlock bbupdater

3. Restore Original 3.14.01 baseband firmware. I don't know for sure if this is necessary, but I'm going to put it in just in case.
   

   bbupdater -f ICE03.14.08_G.fls -e ICE03.14.08_G.eep

   It should go from 1 to 100 about 3 times. As long as it ends like this, you're okay:
   

   ProgressUpdated: 97
   ProgressUpdated: 98
   ProgressUpdated: 99
   ProgressUpdated: 100
   ProcessDetailUpdated: Sending end-pack.
   ProcessDetailUpdated: Checksum OK.
   ProcessDetailUpdated: Verify OK
   ProcessOutlineUpdated: Process time was 1 min 52 sec.
   Resetting target...
   pinging the baseband...
   issuing +cpwroff...
   Done

4. Check your baseband version:
   

   bbupdater -v

   You should see:
   

   Resetting target...
   pinging the baseband...
   issuing +xgendata...
   firmware: DEV_ICE_MODEM_03.14.08_G
   eep version: EEP_VERSION:207
   eep revision: EEP_REVISION:7
   bootloader: BOOTLOADER_VERSION:3.9_M3S2
   Done

5. Run virginizer:
   

   iUnlock ICE03.14.08_G.fls eliteloader.bin

   You should see:
   

   iUnlock v42.PROPER -- Copyright 2007 The dev team
   
   
   Credits: Daeken, Darkmen, guest184, gray, iZsh, pytey, roxfan, Sam, uns, Zappaz, Zf
   
   * Leet Hax not for commercial uses
   Punishment: Monkeys coming out of your ass Bruce Almighty style.
   
   Sending Begin Secpack command
   Sending Erase command
   Waiting For Erase Completion...
   Sending Write command
   00%
   05%
   15%
   25%
   35%
   45%
   55%
   65%
   75%
   80%
   90%
   Sending End Secpack command
   Validating the write command
   FW are equal!
   Completed.
   Enjoy!

6. Check your baseband version again:
   

   bbupdater -v

   You should see:
   
   

   Resetting target...
   pinging the baseband...
   baseband unresponsive to pinging
   Done

7. Now reflash the baseband with the original firmware:
   

   bbupdater -f ICE03.14.08_G.fls -e ICE03.14.08_G.eep

   Same thing as before. Again, just check for the end:
   

   ProgressUpdated: 97
   ProgressUpdated: 98
   ProgressUpdated: 99
   ProgressUpdated: 100
   ProcessDetailUpdated: Sending end-pack.
   ProcessDetailUpdated: Checksum OK.
   ProcessDetailUpdated: Verify OK
   ProcessOutlineUpdated: Process time was 1 min 52 sec.
   Resetting target...
   pinging the baseband...
   issuing +cpwroff...
   Done

8. Check your baseband version for the last time:
   

   bbupdater -v

   You should see:
   

   Resetting target...
   pinging the baseband...
   issuing +xgendata...
   firmware: DEV_ICE_MODEM_03.14.08_G
   eep version: EEP_VERSION:207
   eep revision: EEP_REVISION:7
   bootloader: BOOTLOADER_VERSION:3.9_M3S2
   Done

And now you're done!

[edvelarde]

bilis mo magpost ah..

[hannibal]

i knew this will eventually be out. now, the time has come for me to virginize and update to 1.1.1. yes, the long wait is over Apple

by the way, the correct link for the files is here:

http://code.google.com/p/iphone-elit...e.zip&can=2&q=

[natzky]

how come this came in two days late hehehe

[quietcynic]

Whoops. I'll update the link in my post. Thanks, hannibal.

[josecarlo1129]

Some of the links are not working. Thanks in advance.

[quietcynic]

Checked all the links, they work. The download package is missing quite a few essential files, though. I'm going to get them together and upload an all-in-one archive of the stuff you need.

[edvelarde]

hackintosh link has been remove... iphone dev team vs elite

[skinhead]

hehe yup... hackint0sh is owned by the dev team.. will try this tom on a iUnlock 1.0.2 phone will see

[quietcynic]

Added a detailed guide and a zip file with all the required files. If a mod could change the (obviously incorrect) title, by removing the one command bit, that would be great.