creating banner

**wippy** · 10-07-2009, 10:18 PM

ask lang guys... gagawa me ng banner with the size of 62x135 inches... kelangan din bang 62x135 ang size sa photo-editing software? di kaya ako malag niyan? XD 1gb lang ram ko lol.. CMYK parin dapat ang gamitin?

**Sponsor** · 10-07-2009 10:18 PM

**dryxzzz** · 10-07-2009, 10:31 PM

Originally Posted by wippy

ask lang guys... gagawa me ng banner with the size of 62x135 inches... kelangan din bang 62x135 ang size sa photo-editing software? di kaya ako malag niyan? XD 1gb lang ram ko lol.. CMYK parin dapat ang gamitin?

62"x135" it is. But reduce the resolution to 72 or 100 dpi to lessen the burden on your ram. Not necessarily in CMYK, RGB would be fine.

**drigal** · 10-07-2009, 11:52 PM

Yup! Reduce it into 72 or 100 dpi... But if it is an FA, make it into 300 dpi and RGB is fine.

**wippy** · 10-08-2009, 12:56 AM

okie po salamat guys.

what is FA btw?

**m4rc** · 10-08-2009, 01:46 AM

Originally Posted by wippy

okie po salamat guys.

what is FA btw?

Final Artwork...

**n30fx** · 10-08-2009, 02:33 AM

Originally Posted by dryxzzz

62"x135" it is. But reduce the resolution to 72 or 100 dpi to lessen the burden on your ram. Not necessarily in CMYK, RGB would be fine.

yes sir, tama c sir dryxzzz. reduce it to 72 -100 if u'll use photoshop. using very high resolution will eat up ur memory. gudluck po sa project.

**dryxzzz** · 10-08-2009, 04:14 AM

@drigal
300 dpi is ideal for offset printing though impractical when it comes to large format printing.

FA typical requirements for offset printing

300 dpi minimum resolution
CMYK color mode
TIFF or PDF file format for single page layout (e.g. posters, print ads, etc.)
PDF for multiple page layout (e.g. magazines, newsletters, books, etc.)
Should always be in actual size to avoid mistakes

FA typical requirements for large format printing

100 to 150 dpi resolution for short distance viewing less than 10ft.
Even lower than 72 dpi for long distance viewing more than 10ft. (e.g. gigantic billboards)
RGB color mode
JPEG file format
Should always be in actual size to avoid mistakes

**wippy** · 10-08-2009, 09:50 AM

yung sakin larfe format printing po ba?

tumawag me sa nagpprint, sabi CMYK daw ang gagamitin.

**d1scjock** · 10-08-2009, 10:19 AM

Large format printing usually requires CMYK.

**drigal** · 10-08-2009, 09:13 PM

Thanks dryxx! Wippy, dryxx is right, I forgot to tell about those details, because usually, we use 300 dpi when working because we usually design poster, print ads, etc.

And 72 or 100 dpi usually use for large format printing.. You can use 300 dpi for your project or less.. Di ka naman maglalag, it depends upon your computer. May natutunan na naman ako...