is it available locally? or is there someone selling in the forum?

comments on invisible shield for our iphone is welcome

tnx

nobodys selling here. you must buy it online talga. best thing about invisible shield. its definitely scratchless. my bestskinever skins have scratch on it already while the invisible shield for almost 4 months have no scratch whatsoever.

How easy is it to install invisible shield? DIY right? I got Gmask on my iPhone and its just looking horrible now after about 4 months on it. Scratched up and stuff, at least it does its job though. Hehe

you can try sending a PM to wchan. he's ordering the invisibleshield by batch. i ordered one from him last week and expecting it by end of feb.

i bought one online and it was shipped for free. it took 2 weeks to arrive via regular post. overall, it was easy to install just needs patience.

there is a member that sells, check marketplace & do a search, if u have to wait for it its definitely worth it! ;)

blkmini is right. you need patience to install it. actually its my first skin for my iphone. i love it and didnt regret buying it. but they say bodyguardz is much better. some say.

how about the issue that the invisble shield turning blue? have anyone of you guys encouterd dis problem? tnx

Thats the old Stocks of Invisible Shield. Different Packaging. But the new ones are alot better

if i use AGENT 18 to cover my iphone thats been protected with the invisible shield, will it be ok? Will it get peeled kaya?

i think the agent 18 will not fit your iphone with invishields. agent 18 is like switcheasy right? the inside of the agent 18 is perfectly molded with the iphones body. thus having invishield installed will make it much thicker.

i bought one online and it was shipped for free. it took 2 weeks to arrive via regular post. overall, it was easy to install just needs patience.

where did you get in online?

I'm using invisible shield but the corners are pangit na. Anyone here tried to remove the invisible shield? What is the best way to remove it?

@bleh888 how much? planning to get replacement...

To those who need invisible shields, do let me know. I have some in stock.

How much sir for the invisible shield for itouch? I'm planning to buy too.

http://www.bestskinsever.com (http://www.bestskinsever.com/) they deliver to the Philippines :) it's just like invisible shield. my iPod's scratchless since December 2006!

2006?!? Baka 2007! :)

Invisible Shields is great! Bought one for my MacBook and PSP Slim [from William 'wchan']. Ordered for my iPod Video 5th gen 80gb na rin.

i feel so assured that even without any case, my MacBook is safe to hold and safe from scratches. The small dots created by dust formed under the Speck see-thru case are now invisible.

Great with the palm rest too. ;) Just don't use the one for the trackpad. it will change its texture. well, that's just what i think.

Another thing, you need 4 hands to be able to apply the shield for the top cover. Mine looks perfect with no bubbles. :)

:D

2006?!? Baka 2007! :)

i mentioned iPod, not iPhone. but for argument's sake, the product's longevity on the iPod, Treo and other products will definitely apply for the iPhone.

Invisible Shields is great! Bought one for my MacBook and PSP Slim [from William 'wchan']. Ordered for my iPod Video 5th gen 80gb na rin.

i feel so assured that even without any case, my MacBook is safe to hold and safe from scratches. The small dots created by dust formed under the Speck see-thru case are now invisible.

Great with the palm rest too. ;) Just don't use the one for the trackpad. it will change its texture. well, that's just what i think.

Another thing, you need 4 hands to be able to apply the shield for the top cover. Mine looks perfect with no bubbles. :)

:D


yeah i can vouch for the protection the product provides. regarding the trackpad, i put mine in but yep the texture changes. had to adjust the cursor settings (speed) to make it a bit normal again.. and switch from using my pointer finger to my middle one now :( oh and the sides of the trackpad wont really stick to the shield, so.. it collects dirt and forms uneven "bubbles". still since im an abusive user i decided to keep the shield for the pad on.

Invisible Shields is great! Bought one for my MacBook and PSP Slim [from William 'wchan']. Ordered for my iPod Video 5th gen 80gb na rin.

i feel so assured that even without any case, my MacBook is safe to hold and safe from scratches. The small dots created by dust formed under the Speck see-thru case are now invisible.

Great with the palm rest too. ;) Just don't use the one for the trackpad. it will change its texture. well, that's just what i think.

Another thing, you need 4 hands to be able to apply the shield for the top cover. Mine looks perfect with no bubbles. :)

:D


yeah i can vouch for the protection the product provides. regarding the trackpad, i put mine in but yep the texture changes. had to adjust the cursor settings (speed) to make it a bit normal again.. and switch from using my pointer finger to my middle one now :( oh and the sides of the trackpad wont really stick to the shield, so.. it collects dirt and forms uneven "bubbles". still since im an abusive user i decided to keep the shield for the pad on.

also try and search for wchan and pm him nalang:) you can get your shield in a day or two. plus you'll be helpin out a fellow mugger clean up his inventory.

Ive been using invisible shield simce dec 2007 its great coz of the life time waranty..the invisible shield turns yellow after 5mnths coz of the oils and dirt from ur hands but the best thimg is u can get it replaced i just instaled my new shield last month..i know the guy who imports the shield if u are interested and have questions just pm me.. Its so worth it..

yeah i have invisible shields dala ng sister ko from US but ill be selling these to serious buyers only and the price will be 1500 sorry for the price in demand sya ksi ngayon coz of the iphone 3G that globe will launch this Aug 22. u can contact me at 09162007424 or 09228392777 - Edward

hi, is it a full body shield? do you have something that's for the back only? is this for the iphone 3g? tnx.

yeah i have invisible shields dala ng sister ko from US but ill be selling these to serious buyers only and the price will be 1500 sorry for the price in demand sya ksi ngayon coz of the iphone 3G that globe will launch this Aug 22. u can contact me at 09162007424 or 09228392777 - Edward

Hello there, This is so pricey.

You cant' sell with this kind of pricing compare with MR. William Chan of gadgets n' things for his kind of pricing

MR Chan is a legitimate distributor sya, He has a businessname in Zagg.com.

You cant' even claim the lifetime replacement if you haven't registered your name or secure registered no. online also were did you buy it ( name of business reseller ) or have OR from reseller to complete your registration from Zagg.com.

Pre-requisites required to complete your registration to avail the full life time lifetime replacements.

You have to clear that to those who going to buy with you.

hi, is it a full body shield? do you have something that's for the back only? is this for the iphone 3g? tnx.

Go get With Wiliam Chan much cheaper and legitimate reseller pa Pm me if you have questions for details of him.

You can help our fellow mugger to clean his inventory.

Let say for his price you can save for a good movie, a good food and a taxi fee for it.;)

anyone kind enough to post their iphones with the shield? hehe.. parang hirap kasi install nito.. pasmado pa nmn ako.. wah..

its not that hard just watch the video on zagg.com

if you are pasmado better ask assistance coz it will ruin if you have mistakes like having bubbles. or misalignments.

@ skint

thanks :)

FS: NOW Available in Manila!! INVISIBLE SHIELD by Zagg Inc.
Protection shield for iPhone 3G, for older iPhone units, for Apple Macbook 13.3, Macpro 15.4, Macpro 17 & Mac Air..

Also available for Sony PSP Slim, Nintendo DS, New Apple iPod Nano, itouch, iClassic, Sony Ericsson P1i, Nokia E90 & etc.

You Guys can reach me @ 0921-549-2283. ym:geoffreydt, Tel:324-1071.
http://www.buysell.ph/adpics/48bc297e43f10bed6084a3044.jpg

Excuse me but this does not belong here. You should delete and repost in the Marketplace. Thank you for your cooperation.

lol ang kulit hahaha.

Answer u can buy here!!!
INVISIBLE SHIELD - ym:geoffreydt
http://thumbs2.ebaystatic.com/pict/1902524480658080_1.jpg http://thumbs1.ebaystatic.com/pict/1902524553098080_1.jpg http://thumbs3.ebaystatic.com/pict/2002443483958080_1.jpg http://thumbs3.ebaystatic.com/pict/2002443683128080_1.jpg
http://thumbs3.ebaystatic.com/pict/1902421913128080_2.jpg http://thumbs1.ebaystatic.com/pict/1902421836248080_1.jpg http://thumbs1.ebaystatic.com/pict/2002448319608080_2.jpg http://thumbs2.ebaystatic.com/pict/1902427661598080_1.jpg
GSM: 0921-549-2283 CHECK LOWEST PRICE! JEFF 3241071

Your violating the guidelines your post will be deleted moderator.

Thats not a suggestion its a rule dude newbies are not allowed to sell make that in mind you can only answer queries through PM.

I ordered the Invisible Shield in Zagg.com for my MBP - Unibody, 3 weeks ago. I got the letter from Post Office that I can get the item.

Anyone knows how much I'll pay for the taxes?

Go get With Wiliam Chan much cheaper and legitimate reseller pa Pm me if you have questions for details of him.

You can help our fellow mugger to clean his inventory.

Let say for his price you can save for a good movie, a good food and a taxi fee for it.;)

Hi Skint!

dude, kindly PM me Señor William Chan's contact info so I can get in touch with him.
need shields for my mac air and ipod touch 1st gen. any idea how much this'll scratch my wallet? just curious coz the last line on your entry makes William.. er the shields a little more tempting! hehehe!

forgot to ask: Skint, can Señor William help me install the shields on my mac and touch?
i kinda have the shakes apart from having really slimy hands kase. thnx!

does anyone tried applying invisibleshield for your macbookpro unibody and then installing the speck see thru casing over it? want to be sure if this is possible or will it be too tight...ive heard reviews that the specks can/will damage your equipt when dust gts into it , but wondering if putting double pretection is possible?

i bought mine at Gogadgets in Gilmore Ave dati. Pero sobrang hirap i-install. So then I bought one again in HK and the seller there installed it for me.

hi, how much po price ng invisible shield ni sir william (sya po yung auth dealer non dba?)?
gusto ko po sana mag avail.. worth 650 lang ba? tnx.

hi, how much po price ng invisible shield ni sir william (sya po yung auth dealer non dba?)?
gusto ko po sana mag avail.. worth 650 lang ba? tnx.

It depends on your gadget.



I saw an invisible shield in Digital Walker in GH but i think for iPhone 3G and iPods only.

^how much? pwede kaya sila maginstall?

^how much? pwede kaya sila maginstall?


Not sure with the exact price around 1400 i think but they do install. Look for Charles, sya yun madalas nag-iinstall. But you really have to wait. It will take 30mins or more to install.

Guys, base on experience dont use this... hehhee i mean other then it soooooo hard to install this thing is becomes yellowish as time pass by... it also accumaltes oil and dirt in your hand..

Just G-Mask your precious Iphone for just 1045 PhP and solve... no worries in installing and makes your iphone/ipod touch look good for a lllloooooooonnnnnngggggg time....

just my 2 cents.. base on experience...

but if you prefer challenges... go for that invinsible shield

i bought my Zagg from w.chan dec of last year then got it replaced after 6 mnths because it really turns yellow and accumulates gunk..but its covered by the lifetime warranty..in my experience at first its hard to install but may i suggest that if you make a mistake remove everything slowly then just wash it in the sink and apply it again..ive installed a couple of Zagg for my friends iPhone..and let it settle for 2 days not the suggested 24hrs..so that it will set much more..but honestly i would recommend BODYGUARDZ instead it does not turn yellow and does not accumulate gunk on the sides..and it comes in two sets..and much cheaper..

@Jst4mrvn & cmclim,

regarding the invisibleshield, when you peel it off, does it leaves marks and sticker glue on our unit. mahirp b linisin or clean slate ? was thinking of getting on for my lappy but not sure if its much ok to use BG or Zagg

when it does turn yellow, did u take advantage of the lifetime replacement?

@Tecson
as i said earlier when my Zagg turned yellow i returned it to w.chan for replacement..and there is no residue when you remove the shields for both BG and zagg..ill go with BG..because i tested both..

I tried the BodyGaurdz... No offense to anyone but I hated it. Installation was torture, the edges if not properly installed looks horrid plus it collects gunk, I don't know if it turns yellow like the Zagg because I got rid of it after a few days

G-Masked my iPhone months ago... no complaints until today

i guess it was your first time installing it.. cause after ive installed zagg it was easy for me to install the BG and i used it for 6 mnths no gunk accumulated.. the only reason i removed it its because i got a belkin crystal caase..about the edges leave it for a 2mins after installing before pushing it in place.. what i did was i got a piece of foam and press it against the edge and held it in place with masking tape..and after two days everything looks great..

amigos, how about bestskinsever?

has anyone here tried installing | using one for your iPhones | Macbooks?
i plan to buy | have one installed on my Mac Air but i need some inputs so i can settle my doubts and finally push through with the said plan.

gracias! :)

i guess it was your first time installing it.. cause after ive installed zagg it was easy for me to install the BG and i used it for 6 mnths no gunk accumulated.. the only reason i removed it its because i got a belkin crystal caase..about the edges leave it for a 2mins after installing before pushing it in place.. what i did was i got a piece of foam and press it against the edge and held it in place with masking tape..and after two days everything looks great..

The first time an employee from the store I bought it from installed it... not very well. So I went home and tried to do it myself, again failed lol

No biggie though. I'm actually glad it didn't work out. Love the G-mask on it now. Works with any case, barely noticeable and most importantly, prevents scratches. That's all I wanted :)

**If you're like me, a person whose not that good with his hands and has the patience of a 5 year :p ... My recommendation would be to either stay away from this product or have someone else do it for you.

bestkinsever, invinsible shield or what ever it is called... its hard to install...

Gmask it... i gmask my ipod touch year ago and i can say that it still looks like brand new... and when i take off its protection it is as good looking as NEW.. youll never regret it.. promise

hihihi

bestkinsever, invinsible shield or what ever it is called... its hard to install...

Gmask it... i gmask my ipod touch year ago and i can say that it still looks like brand new... and when i take off its protection it is as good looking as NEW.. youll never regret it.. promise

hihihi

although bestskinsever offers better protection than gmask-- it feels more durable than the thin film that gmask is. we keep our ipods with our keys and coins in the same pocket-- no scratches, as compared to our gmasked-watches (it got peeled off on the first contact with a table)

and bestskinsever is cheaper too. :)

amigos, how about bestskinsever?

has anyone here tried installing | using one for your iPhones | Macbooks?
i plan to buy | have one installed on my Mac Air but i need some inputs so i can settle my doubts and finally push through with the said plan.

gracias! :)

not sure how good protection is for laptops, but we have bestskinsever installed on 3 ipod nanos and 1 ipod touch, which we keep in the same pocket as coins and keys... scratchless as advertised. :)

i saw some in dhub robinsons ermita

visited digital hub last week to have my macbook hdd upgraded to 500gb. saw the invisible shield for macbook (2nd gen, as per label) there and ask if they can install it on my macbook. according to jeff (one of the sales person) it was their first time to install the invisible shield on a macbook since the items just arrived. it took him more than 2 hours (i think) to do the task. i must say that he did a very good job!

so if you guys are planning to have invisible shield installed on your macbook, then digital hub midtown is the place to go.

btw, jeff is an expert in installing the invisible shield on iPhones prior to his first attempt on my macbook. =)


i saw some in dhub robinsons ermita

digital walker in SM southmall sells it for 1.5k.

I bought zagg invisible shield yesterday and the sales assitant at digital hub installed it on my iphone. I'm worried because there are wave like bubbles - it has been almost 24 hours since it was installed. Should I take it off or something?

I'm concerned becaue just last week, i bought the capdase screen and body protector and another sales assistant installed it as well - when I arrived home there were bubbles and the edges were peeling off already. :( I felt my money was just put to waste and wouldn't want the same happen to the invishield.

Thanks in advance!

for what unit did you buy the shield for?

oh i'm sorry wasn't paying attention for an iphone don't worry bout the bubbles it will disappear let it settle for another 24 hrs don't turn it on..for the edges try getting a peice of small foam and some masking tape..wet the edges that are peeling let it dry for a few minutes then stick it again hold it down with the foam and put the tape on it to hold it in its place..make sure your using masking tape so it wont leave any sticky residue..did it with mine and it lasted for six months before i removed it because i got a new case..

Thanks for this! I gues I'll just wait for another [excruciating] 24 hours to see if it settles. :)
I'm not worried about the round bubbles because it looks like bubbles talaga. I'm more worried about the wavy thingies that look like stretchmarks, they're a bit unsightly. :D

post some pics..

does Gmask have a settling period guys? like 24-48 hours?

I was asked to wait for 24 hours before. :D

Sorry it took me a while before I could post a picture.

http://i676.photobucket.com/albums/vv124/kathleen_926/IMG_2584-1.jpg?t=1233496228

It has been a week and they did not disappear. Should I take it back to the store?

if you can return it..then do it..because you weren't satisfied with the work..

Yup take it back to the store have it replaced...
Hope they honor the warranty...

@kathleen

That's normal for me I had that in my ipod but it will not that visible after using more often.

But don't worry it has a lifetime replacement wait it until it peels of then ask for your lifetime replacement from ZAGG through mail.

where's the best place to buy and let them install the invisible shield?:)

Guys why dont you try the screen protectors in digital walker? i bought the one with the matte finish. no finger print marks at all. no need to hassle yourself with wiping everytime

a tip tho (and i know i said it before):

if you're gonna install invisibleshield, just use the back shield! DON'T apply the LCD shield coz of it's yucky orange fruit texture. apply bodyguardz or one of 'em generic shield available at the apple store nalang.

Thanks to those who replied. I went back to digital hub but then the girl who installed it was on aday off- the other sales assistant did not know what to do or advise.

@Skint - how long did it take for those to disappear from your iPod?

@kaloyster- Will the generic shield last? I bought the capdase stuff (both for the back and the LCD) but the back part started to peel off after a day. I brought it back to the store and they suggested that I buy the ZAGG invishield. :(

Sayang I should've found this forum earlier ad read the reviews before I started buying stuff for the iPhone.

it's best to try bodyguardz since the front screen is way much better than that of ZAGG's.

^where to buy bodyguardz sir?

does the aluminum body of the macbook gets easily scratched?
i've read that it takes out the feel of aluminum to a plastic feel..

Depends really on how you handle your unit, but it doesn't scratch as easy as the plastic Macbooks. It will definitely remove the aluminum feel since you'll be placing plastic over it, but at least you have the peace of mind that your baby won't get scratched! :D

Guys any protective film if you used in a wrong way it will not last long

4 to 5 days I think.

If you are referring with the air bubbles but any protective film any brand in few months it will wear off because of frequent handling and other substance in your hands that will wear of the adhesive and chemical reactions from fluid secretions from your hands.

Wether any kinds of hands they have the same materials. :)

That's why it was life time replacement from tear and wear or when you need to repair your unit to center they need to replaced it with new one.

I don't know with other brands like bodyguards, or best skin's :)

Bought the whole kit for 2400 from wchan last week (mb unibody). Pretty hard to install but worth it. At least i don't get paranoid anymore from scratches. Patience lang siguro talaga kailangan kung mag iinstall ng ganito. If anyone asks if i would recommend this product my answer is YES, absolutely.

what happens if you want to open up your MB?

what happens if you want to open up your MB?

There are holes on the shield where the screws should be. The battery hinge also has a hole for that.

ah ok so invisble shield will not be ruined if ever you have to open the mac unibody...

thanks

i think in SM cyberzone Megamall and North Edsa they have invisible shieled where they install.. i saw 1 last month he was installing ta a mb unibody 3k.

seems tempting..